Motogadget Mo.Flash (Digital Flasher Relay) | 4000010

※画像はイメージです。
※取扱説明書が付属する場合は、外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
Article No: 4000010

The mo．flash is by far the most compact load independent flasher relay on the market． Nothing comes close in size and simplicity． The mo．flash flasher unit substitutes all conventional flasher relays．

Attention: If you are looking for a flasher relay with automatic deactivation please refer to our mo．stop series．Ultra compact and light - in essence just a piece of cable attached to a tiny， candy-sized device
Ideal for custom bikes and mods with little mounting space - bulky conventional relays or load resistors are a thing of the past
The wiring can be placed into the handle bar or frame tubes or into the wiring harness
Almost load independent (min． 1 Watt)
Completely implemented using digital semiconductor technology． microprocessor controlled No mechanical workings， no spools， no electric contacts
Consistantly constant and correct flasher frequency and suited for almost all LED turn signal lights， all micro and halogen turn signal lights as well as all 10-watts and 21-watts turn signal lights
e． g． works with 4 turn signal lights or 2 handle bar end turn signal lights
Immediate loss free and brighter illumination of all turn signal lights
Utterly hassle-free connection using only two cables - just connect in series
Completely water tight and vibration resistant because of the moulded-in construction
Short circuit proof， automatic overload protection， switches power up to 100 W．
No heat generation while operating
Only 5 - 18 V operating voltage required
Also applicable for 6 V turn signal lights
Quality ’made in Germany’ - by motogadgetThe mo．flash substitutes a conventional flasher relay． This flasher relay usually is implemented BEFORE the indicator switch． The most convenient way to mount the mo．flash is to simply search and replace the original relay．

The mo．flash can NOT replace the push-button controls． Please refer to our mo．relay+ if you are looking for a flasher relay for push-buttons．

Newer Harley-Davidson model series use a special module to control the flasher controls (TSM/TSSM)． These modules can NOT be replaced or complemented by the mo．flash．Specifications and features

Casing L x W x H - 18 mm x 13 mm x 9，5 mm
Connector cable length - approx． 2 x 50 mm
Weight - approx． 4 g

ユーザのインプレッションを見る