Motogadget Mo.Wave (Digit. Flasher Relay With Fade Effect) | 4000011

※画像はイメージです。
※取扱説明書が付属する場合は、外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
Article No: 4000011

The mo．wave is the world’s first digital flasher relay with fade-in/fade-out effect． Furthermore， it is very compact and load independent．

Every flasher light model is faded in and out smoothly - even LEDs！ Brand new style and looks for your turn signal．While conventional hard switching flashers - especially LED models - only switch on and off blandly， your mo．wave oscillates in a fascinating wave pattern．

Flasher lights in a revolutionary new design - ultra compact and light． Basically just a piece of wire with a tiny candy-sized device． Ideal to draw more attention to all kinds of modded or styled motorbikes and cars．Unique fade-in/fade-out effect
Ultra compact and light - in essence just a piece of cable attached to a tiny， candy-sized device
Ideal for custom bikes and mods with little mounting space - bulky conventional relays or load resistors are a thing of the past
The wiring can be placed into the handle bar or frame tubes or into the wiring harness
Almost load independent (min． 1 Watt)
Completely implemented using digital semiconductor technology． microprocessor controlled No mechanical workings， no spools， no electric contacts
Consistantly constant and correct flasher frequency and suited for almost all LED turn signal lights， all micro and halogen turn signal lights as well as all 10-watts and 21-watts turn signal lights
e． g． works with 4 turn signal lights or 2 handle bar end turn signal lights
Immediate loss free and brighter illumination of all turn signal lights
Utterly hassle-free connection using only two cables - just connect in series
Completely water tight and vibration resistant because of the moulded-in construction
Short circuit proof， automatic overload protection， switches power up to 100 W．
No heat generation while operating
Only 5 - 18 V operating voltage required
Also applicable for 6 V turn signal lights
Quality ’made in Germany’ - by motogadgetSpecifications and features
Casing (L x W x H)18 mm x 13 mm x 9．5 mm
Connector cable lengthapprox． 2 x 50 mm
Weightapprox． 4 gThe mo．wave substitutes a conventional flasher relay． This flasher relay is usually implemented BEFORE the indicator switch． The most convenient way to mount the mo．wave is to simply locate and replace the original relay．

The mo．wave can NOT replace the push-button controls of a push-button instrument． Please refer to our mo．relay+ if you are looking for a flasher relay for push-buttons．

Newer Harley-Davidson model series use a special module to control the flasher controls (TSM/TSSM)． These modules can NOT be replaced or complemented by the mo．wave．

ユーザのインプレッションを見る