Motogadget Mo.Button (One-Wire-Control For Mo.Unit Blue/Basic) | 4002032

※画像はイメージです。
※取扱説明書が付属する場合は、外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
Article No: 4002032

The mo．button， together with the mo．unit， is a great help in reducing ’cable clutter’ and simplifying cable harnesses．

With this tiny cylinder in the steering tube - or in other suitable places - all handlebar fittings， switches and buttons are electrically connected．
The mo．button processes the signals digitally and sends them to the mo．unit blue， basic or mo．unit v．2 via a single， thin cable using the latest bus technology．
The consumers are then switched on and off there．
All control lines go into the handlebars． This saves space， weight， work and time． A must for custom bikes with a clean look on the handlebars．


To understand:
a) with ’normal’ wiring of the handlebar switches， the working current (e．g． lights / indicators) is routed directly via the handlebar switch． Therefore， due to the current intensity， correspondingly large cable cross-sections must be routed from the fuse box to the switch and back to the consumer． This quickly results in thick cable strands． A ’no-go’ for custom bikes with little space or hidden electrics．

b) with the mo．unit without mo．button， only a thin cable would have to be led to the mo．unit for each switch or button function． Only minimal control impulses are passed on here． All large loads and currents are switched directly on the mo．unit and fed directly to the consumer． A significant reduction and simplification of the cable harness can be achieved in this way．

c) the mo．unit blue， basic or mo．unit v．2 in connection with the tiny mo．button again minimize the cable sections to be laid！ All switches / buttons on the handlebar are connected to the mo．button in the shortest possible way within the handlebar． Only ONE thin cable is then led from the mo．button to the mo．unit． The loads and currents are - as explained above - switched directly on the mo．unit． Less cable is not possible！

The mo．button is potted completely waterproof and vibration-proof．Specifications and Features

The mo．button has connections for
- left turn signal
- right turn signal
- light (change between low beam and high beam)
- electric starter
- horn
- front brake light switch

Dimensions of the mo．button
Diameter: 12 mm
Length: 25 mm
The cables are approx． 60 cm long． The connection cable to the m-Unit is 200 cm long．
Weight approx． 30 gr．

Attention， the mo．button can only be used with the mo．unit blue， basic or the mo．unit v．2．

ユーザのインプレッションを見る