【SIP SPAREPARTS】 ブレーキカム SIP、リア、078366 - 0783664

steel，zinc plated
silver
Grade 1 - perfect repair
OEM number(s)：
078366 - 0783664 (PIAGGIO)

※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※画像には他の商品が含まれている場合があります。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。

Brake cam.
Actuating mechanism for the drum brake pads.
The drum brakes are actuated mechanically.
The parts involved are the brake lever，or the brake pedal，brake cable，lever，shaft and brake cam.
The brake cam sits between the brake pads and forces these towards the drum when braking.
Replacement for worn components
Optimum brake performance
Optimum modulation of the brake
When actuated the metal of the cam rubs on the metal of the brake pads.
As a result the cam tends to wear over time.
Copper or high temp grease makes the cam last longer，but even if the brake was always meticulously maintained there will be some wear after years and years of use.
Once there is an edge worn into the cam this will not only affect braking power but also modulation.
Ideally you should be able to finely adjust，or modulate，braking power with the lever or pedal.
If，for instance，the rear wheel locks up you should be able to reduce pressure on the pedal slightly and in a controlled way to unlock it.
With a worn cam it is possible that even though you reduce the force on the pedal the wheel stays locked because the cam is stuck and cannot be pushed back by the brake shoe return springs.
It only unlocks when almost entirely releasing the pedal.
With brakes in particular everyone should be aware that all components should be in the best possible condition，not matter what.
Hence SIP recommends you check your brake with all its components regularly and replace things that are in less than perfect condition.
The Best Setup - Our SIP-TIP：
Include copper grease with your order，check your brake pads and replace them if necessary.
Use SIP Performance brake cables and housings.
The brake camshafts ensure the movement of the brake cable pushes the brake shoes against the interior of the brake drum.
This essential component is prone to wear and tear and following long periods of use must be replaced.
Regrettably PIAGGIO no longer produce this item.
To solve this problem we have had them reproduced as part of our high quality SIP Spareparts range of replacement parts.

ユーザのインプレッションを見る

適合車種： S50、125、50SS、50L、50N、50R、90Racer、90、100、100Sport ( 適合車種を見る )