×
×

ギャラリーを閉じる

今ならポイント2倍 対象商品

【SIP SPAREPARTS】 キャブレターケース SIP、131077 - 239028

商品番号:23902800    

掲載開始日:2026年05月29日

P150E、STAR Deluxe 2S 150、S150、STAR Deluxe... ( 適合車種を見る )

  • NEW
  • 在庫有り
  • 送料無料

販売価格:¥11,944(税込)

実質価格:¥11,705(税込) 最大239ポイント(239円相当)獲得※ポイント詳細

Webikeカードなら

さらに+1.5%還元!

新規ご入会で+3,170ポイントプレゼント!

webikecard

今ならWebikeカード入会で3,000ポイント獲得!
さらに、条件達成で最大4,000ポイント、合計最大7,000ポイント還元!

07/04 15時36分現在:在庫あり(パートナー在庫)
今すぐのご注文で、2026年07月11日 土曜日 から 2026年07月18日 土曜日 に出荷予定です。

ご注文前に正確な納期をご確認したい場合は「納期のお問い合わせ」よりお問い合わせください。
数量:

logo_w_pit_in_square_colorWebikeピットイン パーツ直送・取付サービス

取付依頼の流れ

ポイント詳細

Webikeポイント
2
%還元!
webikeポイント獲得: 239ポイント 2%還元・¥239相当(ウェビック)
aluminium cast
untreated
Round inlet
Grade 1 - perfect repair
OEM number(s):
131077 - 239028 (PIAGGIO)

※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※画像には他の商品が含まれている場合があります。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。

Faithful reproduction with enlarged sealing surface.
Most engine manufacturers do not rely on the Piaggio separate lubrication system for performance-enhanced tuning engines and revert to manual lubrication using an Oil/fuel mixture.
This is the technical design that all large-frame Vespas had before the introduction of the Oil Pump with the Vespa Rally,the so-called “Autolube” system.
Detailed reproduction
High-quality material and workmanship
Enlarged sealing surface
The SIP Carburettor Casing is a loving reproduction of the original part,which is made from high-quality material by a reliable manufacturer.
All specifications correspond to the good old part,except for the carburettor and housing sealing surface,which are enlarged.
This means that larger carburettors than the original can be fitted and adapted (20 - 26 mm diameter).
For 28 mm Si Carburettors we have our CNC milled Carburettor Casing Art.
No.
23916850 and 2391685B in our range.
The SIP Carburettor Casing 12024400 and 23902800 differ only in the shape of the inlet,elongated or round.
The channel shape is optimally adapted to the engine housing channel for optimum flow.
Note:The Malossi PX200 Crankcase “V-One” lacks a machining step on the outside of the clutch housing.
This results in a collision with the Carburettor Casing; minimal material must be ground off the Casing or the Carburettor Casing.
Die-cast aluminum
It never hurts to clean the Carburettor and replace the Gasket Set! Also replace the Float Needle.
Don’t forget the Rubber to seal the idle mixture screw 50274000
Replace rusted Adjusting Screws with 26120000 (attention:special thread).

ユーザのインプレッションを見る

適合車種: P150E、STAR Deluxe 2S 150、S150、STAR Deluxe 2S 125、Sprint 125、125、PX150、PX125、P80、P80E、PX100E、P125X、P125 / SUPER、PX125E、125GT、1... ( 適合車種を見る )


SIP Scootershop:エスアイピー スクーターショップ

SIP Scootershop:エスアイピー スクーターショップ

SIP Scootershopは、ドイツに拠点を置く世界最大級のスクーターパーツ専門ブランドです。 ベスパをはじめとするクラシックからモダンなスクーターまで、圧倒的な品揃えを誇ります。自社開発の高品質なカスタムパーツやアクセサリーも展開。世界中のライダーから愛される、スクーターライフを支えるトップブランドです。

最近チェックした商品

ページ: 1 / 1
買い物カゴアイコン
買い物カゴを確認する
一緒にチェックされている商品
×