【SIP PERFORMANCE】 クラッチカバー SIP PK XL2 3.0、Race

aluminium，CNC machined
silver
incl. bearing
Grade 1＊ - first-class repair and for tuned engines

Assembly＆Instruction Manualsはこちら
Technical tipsはこちら
Assembly＆Instruction Manualsはこちら
Assembly＆Instruction Manualsはこちら
Technical tipsはこちら

※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※画像には他の商品が含まれている場合があります。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。

The 3.0 Clutch Cover from SIP Performance is a plug ＆ play fit for race clutches
Compared to the normal SIP XL2 Clutch Cover，the 3.0 has milled-out Bags on the inside.
The largest tuning clutches available can also be fitted in these pockets without having to use a milling cutter or file.
The Clutch Covers of PIAGGIO’s smallframe models share the fate of many of the manufacturer’s discontinued products.
It is becoming increasingly difficult to find XL2 covers in good condition on the used market.
This is particularly painful，as it is precisely this cover that enables the installation of technically superior 6 Spring Clutches.
SIP has risen to the challenge.
Recessed inside for large and high race clutches
High-quality CNC machined from forged aluminum
Extremely clean and precise Clutch linkage
Low actuation forces
Highly precise and extensively tested
The SIP Clutch Covers 3.0 RACE for the Vespa PK XL2 are not only forged to a high standard，but also precisely machined and refined using CNC technology.
The outer contour is reinforced and the interior is also cut out on the CNC milling machine for large and high clutches with up to 5 or 6 washers.
The Clutch Arm Bearing，which is closed on one side，is integrated and enables extremely low actuating force.
This Cap is compatible with almost all smallframes with manual transmission - a real upgrade，plug ＆ play.
The basic version 3.0 of the SIP Clutch Cover has been developed for the high demands of modern clutch systems，which require high spring forces.
Comprehensive measurements of various installation situations were carried out to ensure compatibility with as many engine blocks，gearboxes，clutches，primary ratios and Clutch Baskets as possible.
A typical feature that was taken into account in the design is the sealing surface of the Crankcase，which is neither parallel nor perpendicular to the plane of the clutch release bearing.
This can result in the pressure mushroom not being positioned centrally on the release bearing when the Cap is adjusted.
As a result，the Clutch is actuated at an angle，which can lead to unclean disconnection or clutch judder when engaging.
SIP Scootershop has therefore placed particular emphasis on the precise reproduction of the critical dimensions，including the angular difference between the sealing surface and the center line of the release mushroom.
The scope of delivery not only includes a Gasket，but also a detailed Installation Guide with troubleshooting tips.
Conclusion：Well Bearing，high-quality workmanship，ideal upgrade to finally be able to ride the better XL2 Clutch without any problems.
Clutch Lever SIP for Vespa PK50 XL FL/HP/XL2/PK125 N/XL2
Clutch Lever SIP for Vespa PK50 XL FL/XL2/HP
Clutch Lever SIP for Vespa PK125 N/FL/XL2
Spring Clutch Lever
Pressure Plate Clutch PIAGGIO，PK XL2
Push Rod Clutch SIP for Vespa PK50 XL FL/HP/XL2/PK125 N/XL2
Push Rod Clutch SIP，RACE for Vespa PK50 XL FL/HP/XL2/PK125 N/XL2
The 3.0 version of the SIP clutch cover is milled out in 2 places on the inside.
On the one hand，this provides more space for larger primary pinions on the crankshaft.
On the other hand，larger clutches can be accommodated and the corners of plates with straight tabs no longer touch the cover (”BFA Race top Race clutch plates 24398440”，“Fabbri Racing Race clutch plates 93956100”).
These modifications have been incorporated in cooperation with Erich Oberpertinger Egig and ensure that the SIP cover can be installed with as little rework as possible，usually plug ＆ play.
SIP Community User Erich O.
about 28615020：
“The cover fits perfectly.
Centering，space，everything is fine.
Only tip：When mounting，you should press the cover in the direction of the main shaft，because you always have minimal play on the screws.
Then it sits nice and centered.”

ユーザのインプレッションを見る

適合車種： S50、125、50SS、50L、50N、50R、PK50、PK50S、PK50SS、PK80S、90Racer、90、100、100Sport、PK100S、PK100XL、PK125、PK125XL Elestart ( 適合車種を見る )