【SIP STYLE】 バーウインカー SIP 70621

Lens：yellow
indicator socket：Bay9s
w/o bulbs
homologation：with e-mark
Grade 1 - perfect repair and as an extremely attractive accessory
OEM number(s)：
70621 (PIAGGIO)

バイク用配線パーツや工具をお探しなら【エーモン】のMOTOLECTIONシリーズはこちら
Assembly＆Instruction Manualsはこちら
Assembly＆Instruction Manualsはこちら
Assembly＆Instruction Manualsはこちら

※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※画像には他の商品が含まれている場合があります。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。

Indicators for the handlebar end from SIP STYLE for classic Vespas.
Visually appealing reproduction of the handlebar end indicators.
Every classic car built from 1961 onwards with more than 125 cc must be fitted with indicators.
When upgrading the engine，it is therefore inevitable that the Indicators will also need to be replaced.
These handlebar end indicators from SIP STYLE offer the simplest retrofit option
Available in yellow，black and transparent
Look like the original
With E-mark
The Indicators and their lenses have E8 approval and can therefore be used in road traffic in compliance with the law.
They are designed for a bright 12 V/21 W halogen light and comply with current requirements.
Please note that bulbs are not included in the set.
The Indicator Lens are also compatible with the old HELLA handlebar end indicator sockets.
The SIP handlebar end blinker Bushes are included in the scope of delivery.
This is required if models without an inner blinker tube (Sprint/Rally/V50/PV/ET3/PX/T5) are to be converted to handlebar end indicators.
Simply mount it between the Switch/Trottle Tube and handlebar end indicators，it ensures a secure hold and saves you the dubious fixing with gaffer tape etc.
Vespas，which are equipped with handlebar end indicators as standard，have internal handlebar tubes.
These do not rotate and have the right diameter to mount the Indicators at the end of the handlebars.
These models also have special rubber grips that are open at the end.
The end of these Grips can be folded over to fit and remove the Indicators，similar to a turned-up Socks，allowing you to reach the fixing screw of the Indicator.
The connecting wire of the handlebar cable runs inside the Indicator.
A Spring is placed over it，then the hexagon is attached to the Wire with a clamping screw and finally screwed in place.
Inserting the Festoon Bulb pretensions the Spring，creating an electrical connection.
Earthing takes place via a wire bracket in the inner handlebar tube.
Conclusion：New technology in an old design.
The right light source
The Indicator Switch is useful
The appropriate Relays
These Grips also fit，for example

ユーザのインプレッションを見る

適合車種： P150E、STAR Deluxe 2S 150、STAR Deluxe 4S 150、STAR Deluxe 4S 125、S125、S150、S50、STAR Deluxe 2S 125、Sprint 125、125、PX150、PX125、50... ( 適合車種を見る )