【SIP PERFORMANCE】 インテークマニホールド SIP PERFORMANCE 6リードバルブ ブラック，刻印ロゴ入り

for PINASCO engine case "Slave"
aluminium CNC
for carburettor 30-38mm
inner diameter：38mm
reed valve
w/o reed valve
for reed valve "Aprilia Rotax"，selectable air bellow
TUNING RACE - for professionals

Technical tipsはこちら
Performance diagramsはこちら
Performance diagramsはこちら
Technical tipsはこちら
Technical tipsはこちら
Technical tipsはこちら

※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※画像には他の商品が含まれている場合があります。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。

SIP Performance six-petal reed-valve manifold suitable for the ‘Slave’ Vespa largeframe engine casings from PINASCO.
A reed-valve manifold with a large six-petal reed-valve，for use with the PINASCO largeframe engine casings，from SIP！ The larger internal cross-section of the six-petal reed-valves enables the full potential of the larger capacity tuning cylinders to be properly exploited.
38mm inlet diameter，suitable for the VHS 34-39，TMX 38 and PWK 38 carburettors.
Compatible with 30-38mm internal-diameter connection rubbers (60/70mm fixing hole spacing).
Made in Germany，CNC machined from solid billet aluminium.
This manifold suits both the PINASCO produced ‘Slave’ Vespa PX and T5 engine casings and their ‘Big-bore’ engine casings for the T5，including a PX200 piston stroke.
The manifold itself has an upper and lower section，three gaskets and all necessary mounting bolts and washers are included in the kit.
To connect a carburettor，connection rubbers with a mounting hole spacing of between 60 and 65mm (Mikuni，Dell’Orto - ＃22301850，＃22301810，＃22301800) are required.
Compatible reed-valves include the original ROTAX reeds and also other tuning types，such as the version produced by V-Force.
We recommend the Italkit ‘Doble Prisma’ (＃27429100).
Further six-petal reed-valves with other fixing hole spacings can usually also be adapted to fit successfully.
The internal inlet opening diameter is 38mm.
The upper section of the manifold can be rotated on the lower section by 10°，allowing fine adjustment of the carburettors final position.
The delivery includes：
Includes all the necessary fixing materials and gaskets，but no connection rubber or reed-valve block.
Attention：Check the positioning of the carburettor in relation to the scooters chassis before use！ Due to the size of the manifold there could be clearance problems on certain scooter models.
In some cases this manifold cannot be properly fitted without modifying the scooter chassis！
Reed-valve block Italkit ‘Doble Prisma’ from the APRILIA RS125.
Carburettor connection rubber.
PINASCO ‘Slave’ engine casings.

ユーザのインプレッションを見る

適合車種： P150E、STAR Deluxe 2S 150、S125、S150、STAR Deluxe 2S 125、Sprint 125、125、PX150、PX125、P80、P80E、PX100E、P125X、P125 / SUPER、PX125E、12... ( 適合車種を見る )