【SIP PERFORMANCE】Racing Exhaust SIP Performance 2.0，stainless steel unpainted，carbon silencer color silencer：carbon

Exhaust type：Reso exhaust
Engine type：200cc，Largeframe
stainless steel
unpainted
carbon silencer
color silencer：carbon
right hand
fits wide tyre
homologation：BSAU 193 A 1990 T3
TUNING SPORT - powerful
For race use only. Not admitted in the area of the German StVZO！

ガスケットの購入はこちら

※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※画像には他の商品が含まれている場合があります。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。

Racing Exhaust SIP PERFORMANCE 2.0 Righthand from JL EXHAUSTS - handmade，high-torque and widely applicable.
The legendary Righthand market has long been characterized by RZ - now comes the SIP PERFORMANCE 2.0 as a Righthand version，handmade by JL EXHAUSTS (Jim Lomas).
The completely newly developed，significantly more voluminous body delivers 18-32 hp depending on the setup and enables high top speeds without sacrificing everyday utility.
Voluminous，newly developed body
Handcrafted by JL EXHAUSTS
Very wide range of applications
Flexible damper selection
Following the success of the SIP PERFORMANCE 2.0 in the Lefhand range，the consistent Righthand version now follows：the resonance body has been redesigned and is significantly more voluminous，but remains practical - Centre Stand，wide tires and even a spare wheel are still possible.
The Exhaust is manufactured by hand at JL EXHAUSTS，optionally in stainless steel or steel with Clear Lacquer.
The Exhaust Manifold is suspended on both sides by Springs (rubber-coated) and the Holder on the Traverse is designed to absorb the vibrations of the Silencer.
The character is clearly designed for powerful torque and clean gear connection：Insert earlier than NEWLINE or DSE，with power being cleanly pulled through to 4th gear - with comparable peak power.
Depending on the engine tuning，18-32 hp and high top speeds can be achieved; jetting and ignition settings should be checked and optimized accordingly.
The Exhaust is available with or without a screw-on carbon Silencer.
Alternatively，other SIP silencers or the S＆S silencer will also fit; the lasered logo may have to be turned backwards so that it is positioned correctly.
Installation on Sprint/Rally is possible in principle，but is time-consuming：The Silencer can bump against Side Panels that are pulled far down，making adjustment work necessary.
There is a JL guarantee for quality：If an Exhaust breaks，it will be repaired or replaced by Jim Lomas (excluding accident damage).
Valid for first owners who have purchased from SIP for 3 years from the date of purchase.
Conclusion：The SIP PERFORMANCE 2.0 Righthand is an uncompromisingly powerful exhaust solution for tourers and high-end setups.
For 139-177 cc，plan for at least a 24 Carburettor and longer gear ratio.
For 200 cc with SI Carburettor：significantly larger jetting than standard required.
For high-performance setups：MALOSSI 210，COSA clutch，racing/long Stroke Crankshaft，modified Cylinder Head.
For the 30 hp class：SIP PERFORMANCE Ignition，30-36 mm reed carburetor，Flowed Crankshaft and suitable peripherals.
“My road-tuned PX200 with 210 MALOSSI，long-stroke and 24 SI Carburettor produces a whopping 21.2 hp at 23.3 Nm with the ‘2.0’ during the test runs.
Unbelievable.
The Exhaust has brutal power.”
-Alex，SIP man，02/2013
“Compared to the old SIP Performance NG，my 210 with 30 mm Carburettor has an increase from 22.5 hp to 26.6 hp.
That’s 4 hp - just through the Exhaust.
The torque has also increased by 2.9 Nm.
The scooter has power like a tractor.”
-Robert，SIP man，02/2013
“I was skeptical about whether the SIP Performance 2.0 would actually increase power by around 3 hp as described，so I decided to test it myself.
Woooow！ I got goosebumps as soon as I set off.
The torque in the lower rev range is insane and cannot be compared with the old SIP Performance.
Fun is guaranteed at every speed.”
-Max，SIP man，09/2013
Note：JL Exhausts has been struggling with a sharp rise in material and personnel costs for some time now.
Customs duties，bureaucratic hurdles and a shortage of skilled workers are making production even more difficult and expensive.
Unfortunately，this will lead to a price increase for all models from 07/2025.
We have been able to mitigate the adjustment for the most common racing exhaust systems，but some models will be permanently removed from the range.
The exhaust systems are still manufactured by hand in Europe to the highest quality standards.
Low noise development，high durability，a striking racing look thanks to clean weld seams and high-quality materials such as stainless steel continue to speak for these exhaust systems.

ユーザのインプレッションを見る

適合車種： 200 DS、COSA 1、P200E／PX200 E、PX200 E Lusso／EFL／Arcobaleno／Elestart、PX200 E’98／MY／Millenium ( 対応モデルを見る )