×
×

ギャラリーを閉じる

今ならポイント2倍 対象商品

【SIP BFA】 リードバルブブロック SIP BFA 187/215/225/306用

商品番号:78245210    

掲載開始日:2026年05月29日

P150E、STAR Deluxe 2S 150、S125、S150、STAR D... ( 適合車種を見る )

  • NEW
  • 在庫有り
  • 送料無料

販売価格:¥22,103(税込)

実質価格:¥21,661(税込) 最大442ポイント(442円相当)獲得※ポイント詳細

Webikeカードなら

さらに+1.5%還元!

新規ご入会で+3,331ポイントプレゼント!

webikecard

今ならWebikeカード入会で3,000ポイント獲得!
さらに、条件達成で最大4,000ポイント、合計最大7,000ポイント還元!

07/04 15時36分現在:在庫あり(パートナー在庫)
今すぐのご注文で、2026年07月11日 土曜日 から 2026年07月18日 土曜日 に出荷予定です。

ご注文前に正確な納期をご確認したい場合は「納期のお問い合わせ」よりお問い合わせください。
数量:

logo_w_pit_in_square_colorWebikeピットイン パーツ直送・取付サービス

取付依頼の流れ

ポイント詳細

Webikeポイント
2
%還元!
webikeポイント獲得: 442ポイント 2%還元・¥442相当(ウェビック)
carbon
for SIP BFA 225-306 engine
66x52 mm
TUNING RACE - for professionals

Assembly&Instruction Manualsはこちら
Assembly&Instruction Manualsはこちら

※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※画像には他の商品が含まれている場合があります。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。

Inlet manifold and reed valve for the SIP-BFA crankcase for Vespa Largeframe models.
For a powerful two-stroke engine the fuel-air mixture ideally needs to be fed into the engine with as little obstruction as possible.
The inlet tract should be short and without restrictions.
This exactly is where the BFA inlet manifold excels.
Short inlet tract
Plenty area for carburettors up to 40mm.
Perfectly flowed with a stuffer
The inlet tract of the SIP-BFA crankcase is perfectly designed for the unhindered passage of air-fuel mixture into the engine.
The reed sits well centred above the crankshaft and its angled towards the piston crown.
The carburettor directly bolts to the reed.
Layout BFA inlet manifold
The BFA inlet manifold was designed for these engines,hence it is a perfect fit.
It’s cast in aluminium with an integrated stuffer.
The reed itself is a modified Kart-Racing.
Gaskets and bolts are included valve with 4 huge carbon fibre petals.
The carburettor itself is fitted with a connecting rubber.
This rubber is not included but needs to be selected to fit the chosen carburettor.
The inside diameter of the manifold is 40mm,the outside diameter where the connecting rubber sits is 45mm
Conclusion:The best possible way for the fresh charge to enter the SIP-BFA crankcase.
The Best Setup - Our SIP-TIP:
Only fits the SIP BFA crankcases from 187cc to 306.
The go to carburettors for a powerful setup are either a Dell’ORTO 39 VHSB 39 ND (art.-no.
MA09790) or a Smart Carb SC2 40 (art.-no.
618438SC)
Make sure to order the correct rubber connector for your carburettor,e.g.
Art.-No.
40410000 for DELL’ORTO 39

ユーザのインプレッションを見る

適合車種: P150E、STAR Deluxe 2S 150、S125、S150、STAR Deluxe 2S 125、Sprint 125、125、PX150、PX125、P80、P80E、PX100E、P125X、P125 / SUPER、PX125E、12... ( 適合車種を見る )


SIP Scootershop:エスアイピー スクーターショップ

SIP Scootershop:エスアイピー スクーターショップ

SIP Scootershopは、ドイツに拠点を置く世界最大級のスクーターパーツ専門ブランドです。 ベスパをはじめとするクラシックからモダンなスクーターまで、圧倒的な品揃えを誇ります。自社開発の高品質なカスタムパーツやアクセサリーも展開。世界中のライダーから愛される、スクーターライフを支えるトップブランドです。

最近チェックした商品

ページ: 1 / 1
買い物カゴアイコン
買い物カゴを確認する
一緒にチェックされている商品
×