【SIP PERFORMANCE】 ホイールハブ SIP PERFORMANCE ET30 5／86 フロント 10インチ ZIPホイール／ホイールスターへのコンバージョン用

black brilliant
aluminium CNC
for Steering Column PK/PX/T5/Cosa Φ Axle 20mm
for rim type ET30 5x86 Center bore 46mm
for Axle Seating PX’98/MY/NT 20mm，also radial
for Brake Disc Φ200/97mm，5-hole

Assembly＆Instruction Manualsはこちら

※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※画像には他の商品が含まれている場合があります。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。

The solution for a new rim design
The SIP Series Pordoi - Rim in size 10 - inch for all Classic Vespas！ That was our dream and now it’s coming true.
We have this high-precision Wheel Hub for all Classic Vespas with Disc Brake and have also had it tested so that you can now upgrade to the new generation of rims without any worries and completely legally.
For all Classic Vespas with Disc Brake and 20mm front axle
Precisely manufactured from CNC aluminum：high-strength，smooth-running，elegant look
With parts certificate according to StVZO
Also available for the rear axle (24277430)
The SIP Performance Wheel Hub replaces the Brake Drum of the Piaggio Disc Brakes of late PX Vespa’s and the Grimeca drums of retrofitted Disc Brakes.
Instead of the large bolt circle for the Vespa-typical ring rims，the Wheel Hub offers the 5/86 bolt circle in the center，which is standard on modern Vespas.
This means that the rims of the Piaggio ET2/ET4，ZIP etc.，as well as the newer modern Vespas GTS and Primavera/Sprint can be adapted.
However，one selection criterion must be observed：The offset (ET).
Older modern Vespas，especially with 10” rims，have ET30.
Newer modern Vespas，especially those with 12” wheels，run with ET20.
The SIP Series Pordoi Rim in 10” Art.
No.
6505 corresponds to this system with offset 30.
The SIP Rim 6505 is permitted for use in the parts certificate of the Wheel Hub.
The SIP Rim star 39047 also fits thanks to ET30.
The Brake Disc is attached to the rear of the Wheel Hub.
All Vespa-typical washers with an inner diameter of 97 mm fit.
Floating Brake Discs also fit without reworking.
We recommend our SIP Performance Brake Disc 56324610.
The parts certificate for the Wheel Hub refers to the original Piaggio Brake Disc or replacement parts with ECE R90 marking (Galfer GF650W).
The SIP Wheel Hub in the ET30 version (39044200) has passed all load tests and is approved for use on public roads.
Registration in the vehicle documents is carried out via a parts certificate after approval by a technical service (e.g.
TUV).
SIP also offers a complete kit with parts certificate：”Radial Disc Brake” incl.
conversion wheel hub 5/86 ET30，Art.
No.
300R30xH.
The detailed Mounting Instruction including parts certificate for 390442 is included with all SIP Wheel Hubs 39044.
The Wheel Hubs with the offset ET20 are largely identical in construction to the ET30 Hub; although they are not mentioned in the parts certificate，it can be assumed that they will also withstand all loads.
The load tests were fulfilled with the worst-case loads in the event of conversion to the larger 12” rims！ (Information for the technical service).
Riding behavior，wheel contact point and track offset：The wheel contact point with Wheel Hub 5/86 and the SIP Rim 6505 changes in the same way as when the wider ring rim SIP 81011 or 2.50-10 is fitted to an original Vespa.
These dimensions are the standard width of the newer 10” Vespas (Cosa，Skipper，ET2/ET4 etc.) and are recognized，even very popular.
Conclusion：A big step towards new vehicle designs and custom possibilities.
All 100 percent safe thanks to tests and approval for public road traffic.
Aluminum CNC
Bolt circle Rim 5 x 86 M8
Centering diameter 46mm
with 5 bolt circle M6 for Brake Disc Φ200/97mm
also fits with floating Brake Disc (floating)
Incl.
wheel bearing for Axle Φ 20mm
fits Axle Seating PX’98/MY/NT 20mm，also radial
Gear Ring Spee

ユーザのインプレッションを見る

適合車種： P150E、STAR Deluxe 2S 150、STAR Deluxe 4S 150、STAR Deluxe 4S 125、STAR Deluxe 4S 200、S125、S150、S50、STAR Deluxe 2S 125、STAR Autom... ( 適合車種を見る )