【SIP PERFORMANCE】 メインハーネス SIP Performance フルトラ点火へのコンバージョン用 SIP PERFORMANCE VAPE AC

Preparation for SIP Rev Counter
Without Battery，with Horn Rectifier (optional without Horn Rectifier)
with high-/low beam and brake light
12V AC
Grade 1＊ - first-class repair and for tuned engines

バイク用配線パーツや工具をお探しなら【エーモン】のMOTOLECTIONシリーズはこちら
Circuit diagramsはこちら
Circuit diagramsはこちら

※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※画像には他の商品が含まれている場合があります。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。

AC Wiring Loom from SIP Performance for the Vespa PX80-200 E Lusso.
If you purchase a SIP Speedometer/Rev Counter and a SIP Performance VAPE Ignition for your scooter，you can use a SIP Performance Wiring Loom to plug ＆ play almost all the connections for the Speedometer/Rev Counter and Ignition.
No more tedious searching for the right Wire from which，for example，the power supply for the speedometer can be disconnected.
Simple Plug ＆ Play installation for speedometer and Ignition
High-quality workmanship and materials from German production
Optimum integration into the scooter without subsequent adjustments
The AC versions of the SIP Performance Wiring Looms are designed for concepts without a Battery.
Subsequent conversion to direct current (full DC) is not possible.
In this case，please use the DC versions of the Wiring Loom.
The AC Wiring Loom for Vespa PX80-200 E Lusso provides the power supply for the speedometer black box in the front part of the scooter.
The connection cable is designed so that it can be routed both in the Handlebar and under the Horn Cover.
This means that the black box can be installed in the desired position on the scooter，depending on space and preference.
Plug ＆ Play preparation for the VAPE Voltage Regulator，optionally available Wiring Loom (86134052) for connecting the Wiring Loom to a Ducati/Classic VAPE Voltage Regulator
No Battery，no later conversion to Full-DC possible
Connection of the Control Lights and fuel gauge of the SIP Speedometer/Rev Counter with original Piaggio Wiring (58296400)
Four Indicators，Indicator Switch with six wires - this Indicator Switch (21566900) or that Indicator Switch (55014500)
Recommendation for converting to the Indicator Switch with speedometer button (23047100) with the Indicator Switch SIP (18650410) or the Speedometer/Tachometer SIP (86134012) wiring harness
Light Switch with 9 wires (23185200)
DC power supply for the Horn with Horn Rectifier (99260200)
12 V DC Horn (no snare) (16375000)
Provision for 3-pole AC Indicator Relay PIAGGIO for 12V (85036000) or the Indicator Relay RMS (85030000)
Preparation for a Brake Light Switch on the Steering Head，Connection with original Piaggio Wiring (58061700)
The Brake Light Switch (18187810) on the foot brake pedal must be a “Lock” variant，e.g.
also Brake Light Switch (18187800)
The protective hose for the parts of the Wiring Loom that run inside the chassis is deliberately installed with a large diameter.
This allows the Wiring Loom to be adjusted flat as it passes through the Frame，which makes installation much easier.
Caution：Always handle the plugs for the SIP Speedometer/Rev Counter with extreme care and NEVER pull in the Wiring Loom using these plugs or cables！ These wires only have a cross-section of 0.5 mm and - like the plugs - are not designed to absorb large forces.
The black ground cable to the Engine with 6 mm eyelet must be connected to the VAPE CDI.
Either Screw it directly onto the CDI or screw it to the Crankcase if the CDI has been fitted with the earth cable (58484031).
We always recommend installing the separate ground cable.
A VAPE-Classic Voltage Regulator can be installed with the corresponding Wiring without having to re-crimp the plugs.
Conclusion：The perfect plug ＆ play solution for all those who do not want to delve deeper into scooter electrics，but would like to “plug together” according to instructions.
Light Switch SIP Conversion
Brake Light Switch
Ignition Lock SIEM
Note：This Wiring Loom can optionally also be operated without Horn Rectifier and then with a 12V AC snare.
Only a small modification is necessary for this：4 wires are provided for connecting the Horn Rectifier：2 times green-black，one time gray and one time black.
To operate a 12V AC snare，these wires must be connected as follows：Connect one of the green-black wires (no matter which one) to the gray wire.
Connect the other green-black Wire to the black Wire.
The Light Switch 23185200 must also be used with a 12V AC snare.

ユーザのインプレッションを見る

適合車種： P150E、PX150、PX125、P125X、PX125E、PX125E Arcobaleno、P150E Arcobaleno、P150X、P200E、PX200E、PX200E Arcobaleno、PX200E Arcobaleno Eles... ( 適合車種を見る )