【SIP PERFORMANCE】 メインハーネス SIP Performance フルトラ点火へのコンバージョン用 SIP PERFORMANCE VAPE DC

Preparation for SIP Rev Counter
with battery
with parkinglight，high-/low beam and brake light
4x indicator
12V DC
for 8-pin Ignition Lock
Grade 1＊ - first-class repair and for tuned engines

バイク用配線パーツや工具をお探しなら【エーモン】のMOTOLECTIONシリーズはこちら
Assembly＆Instruction Manualsはこちら
Assembly＆Instruction Manualsはこちら
Circuit diagramsはこちら
Circuit diagramsはこちら

※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※画像には他の商品が含まれている場合があります。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。

DC Wiring Loom from SIP Performance for the SIP VAPE Ignition of the Vespa P80-150X，PX80-200E，Lusso 1° and P200E.
If you buy a SIP Speedometer/Rev Counter and a SIP Performance VAPE Ignition for your scooter，you can use a SIP Performance Wiring Loom to plug ＆ play almost all the connections for the Speedometer/Rev Counter and Ignition.
No more tedious searching for the right Wire from which，for example，the power supply for the speedometer can be disconnected.
Simple Plug ＆ Play installation for speedometer and Ignition
High-quality workmanship and materials from German production
Optimum integration into the scooter without subsequent adjustments
The DC variants of the SIP Performance Wiring Looms are designed for concepts with a Battery.
All consumers are powered directly from the battery and the power from the alternator is used to recharge the battery.
A Headlight Unit LED can be connected purely electrically without any further modifications.
Various wires are connected to the original Headlight Plug.
These connections must be made individually without the original Headlight Plug.
A switched 12 V connection is available in the Junction Box under the Horn Cover.
A USB socket can be connected here，e.g.
to charge a cell phone on the road.
The full DC Wiring Loom for Vespa P80-150X/PX80-200E/Lusso 1°/P200E provides the power supply for the speedometer black box in the front part of the scooter.
The connection cable is designed so that it can be routed both in the Handlebar and under the Horn Cover.
This means that the black box can be installed in the desired position on the scooter，depending on space and preference.
Plug ＆ Play preparation for the SIP Fast-Flow Fuel Tap
Plug ＆ Play preparation for the VAPE Voltage Regulator，optionally available Wiring Loom for connecting the Wiring Loom to a Ducati/Classic VAPE Voltage Regulator
Plug ＆ Play preparation for temperature or lambda sensor
With Battery
Indicator
12 V DC Horn (no buzzer)
Provision for 3-pin DC Indicator Relay (85031000) for 12 V with output for the Control Light in the Steering Head
Must be operated with the 8-pin Ignition Lock (31190000)
Parking light when Engine is switched off (key position left in Ignition Lock)
Provided for Light Switch (18790000) and Indicator Switch (16451600) of Models with Battery
Intended for Wiring in Steering Head with 8 wires (article 18560340).
This Wiring is included in the scope of delivery！
Preparation for a Brake Light Switch on the Steering Head for solutions with fully hydraulic Disc Brake.
If this is not required，please ensure that the plugs at the Wire ends are well insulated and cannot come into contact with metal in the Steering Head.
The Brake Light Switch on the foot brake pedal must be a “Lock” variant，e.g.
article the Brake Light Switch (18187810) or the Brake Light Switch from Piaggio (18187800)
The SIP Performance DC Wiring Looms are supplied with two Fuse Holders，each with a 10 A fuse.
This is the maximum value，Fuses for higher rated currents must NOT be installed.
The protective conduit for the parts of the Wiring Loom that run inside the chassis is deliberately installed with a large diameter.
This allows the Wiring Loom to be adjusted flat as it passes through the Frame，which makes installation much easier.
Caution：Always handle the plugs for the SIP Speedometer/Rev Counter with extreme care and NEVER pull in the Wiring Loom using these plugs or cables！ These wires only have a cross-section of 0.5 mm and - like the plugs - are not designed to absorb large forces.
The black ground cable to the Engine with 6 mm eyelet must be connected to the VAPE CDI.
Either Screw it directly onto the CDI or screw it to the Crankcase if the CDI has been fitted with the earth cable (58484031).
We always recommend installing the separate ground cable.
A VAPE-Classic Voltage Regulator can be installed with the corresponding Wiring without having to re-crimp the plugs.
Note：
When used with a SIP tachometer，the ignition pulse must be set to -1-.
Conclusion：The perfect plug ＆ play solution for all those who do not want to delve deeper into scooter electrics，but would like to “plug together” according to instructions.
Light Switch SIP Conversion
Brake Light Switch
Ignition Lock SIEM

ユーザのインプレッションを見る

適合車種： PX150、PX125、P125X、PX125E、PX125E Arcobaleno、P150X、P200E、PX200E、PX150E ( 適合車種を見る )