【SIP - VAPE】Ignition SIP PERFORMANCE by VAPE RACE 12V DC

for Vespa PK50-125／S／XL／XL2／ETS
Version：Race
aluminium CNC
flywheel ca.：1390g
cone 20／20mm／ 20／24mm，M12
12 magnet
110 watt
9 coils
M12 mm
16 ignition curves，freely programmable
16 pre-programmed curves selectable via Switch
Curves can be adjusted via PC
All SIP Performance by VAPE Ignitions can be retrofitted

※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※画像には他の商品が含まれている場合があります。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。

Powerful and reliable ignition as an update for classic Vespa models.
SIP have managed to gain the assistance of a major European producer，VAPE，to manufacture these high-end ignition systems for our beloved Vespas.
A lot of development work and the lifeblood of our team goes into every ignition.
Solutions have even been devised for rare Vespa models.
The materials，production and construction of the SIP PERFORMANCE ignition systems are of the highest quality.
The laser-cut logo is a good indication of the overall clean and efficient manufacture of the components of this kit.
The advantages of this ignition speak for themselvers
Strong power supply
Strong，reliable spark
Particularly stable flywheelThe electrical functions are representative of state of the art modern technology.
Due to the eight coils included on the stator-plate enough power is created at tick-over revs to already fully illuminate the Vespas lighting.
The extremely stable flywheelOne of the most major advances achieved is the production of the fly/fanwheel unit as a single component，avoiding a riveted inner mounting-cone and an uneven rotation.
This greatly reduces engine vibration while also noticeably extending the working life of the flywheel side crankshaft bearing.
The fanwheel is CNC machined from solid aluminium and delivers an identical volume of cooling air to the cylinder as the original PX 125 and PK items from PIAGGIO，throughout the whole rev-range.
The amount delivered by most aftermarket ignition systems is easily surpassed by our design，without preventing higher motor speeds.
The flywheel intended for the smallframe Vespas weighs 1390 gr.
and for the largeframe 1660 gr.，making them both considerably lighter than their original counterparts.
This primarily improves throttle-response，but leaves the motor easily manageable in urban traffic and while carrying a pillion.
Our SIP - VAPE flywheels are 100% compatible with the original flywheel remover type.
The two versions of the SIP-Vape ignition：Road or SportThe CDI module is available as a ‘Road’ version with a static ignition point，similar to the original item，or a ‘Sport’ version that includes a variable ignition point which advances at low revs.
This increases the available torque - especially at the lower end - and the ignition point is then gradually retarded as the rpm rises into the power-band.
This also helps reduce the combustion temperature while simultaneously providing an increased rev-range.
The exact adjustment range is shown in the instructions as a diagram.
Between 4000 and 8000 rpm.
E.g.
adjusts the ignition by 8 degrees towards retarded.
The pick-up on the stator-plate is split into two and arranged on top of another instead of next to each other as with the original design.
This eliminates the possibility of false positioning during the initial set up due to the sloppy manufacturing tolerances included on many Vespa engine casings，crankshafts，stator-plates and flywheels.
The exact ignition point is clearly marked with a precise line on both the flywheel and stator-plate，which allows ignition adjustment without stroboscopic lamp.
All you need to do is find out the top dead center (TDC).
Alternating current AC or direct current DC.
We have both AC and DC versions available.
The most common variant is the AC version for all models without a battery.
We recommend the DC type if you wish to power digital components such as the SIP Speedometer，or you requief="https：//www
Scope of delivery of the Ignition SIP PERFORMANCE by VAPE DC
Flywheel
Ignition/Lighting Coil
Stator Plate
Fanwheel
Rectifier
CDI Ignition Unit
Ignition Coil
HT Lead
Fastening material
Plug
Mounting Instruction

ユーザのインプレッションを見る

適合車種： PK50、PK50XLS、PK125 ( 適合車種を見る )