【SIP - VAPE】Ignition SIP PERFORMANCE by VAPE RACE 12V AC

for Vespa 125 GTR 2°／TS 2°／150 Sprint V 2°／Super 2°／200 Rally 2°／PX80-200／PE／Lusso／Cosa
Version：Race
aluminium CNC
flywheel ca.：1660g
12 magnet
110 watt
9 coils
16 ignition curves，freely programmable
16 pre-programmed curves selectable via Switch
Curves can be adjusted via PC
All SIP Performance by VAPE Ignitions can be retrofitted

※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※画像には他の商品が含まれている場合があります。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。

Variable Ignition for classic Vespa and Lambretta Models.
16 pre-programmed and freely programmable ignition curves.
Freely programmable Ignition from VAPE.
16 curves can be selected and freely changed or programmed as required.
The SIP Performance by VAPE Ignition can either be retrofitted with the freely programmable Ignition Unit or ordered as a freely programmable complete set.
16 pre-programmed curves
Freely programmable
For all SIP Performance by VAPE Ignitions
General information on variable Ignitions.The advantage of using an Ignition with variable ignition timing is that the ignition timing can be perfectly adapted to the respective engine speed.
Depending on the engine speed range，a different ignition setting may be necessary for optimum combustion.
This means that a static Ignition only works optimally in some speed ranges，but inefficiently or even poorly in others.
Variable Ignitions provide a remedy.
Depending on the requirements in the different speed ranges，the Ignition adjusts to optimize combustion.
Since every tuned Engine works slightly differently，the Ignition should ideally be programmed individually.
However，this is not easy，it requires a lot of “know how"，skills and technical possibilities to check the correct function.
Ignitions with pre-programmed curves are a common compromise solution.
Different curves can be tested against each other and often a good approximation of the ideal ignition curve can be found.
However，this solution is also only recommended for professionals，as there is a risk that the ignition timing in a certain range is far from optimum.
This can result in engine damage.
The freely programmable Ignition by VAPE for the SIP Performance Ignition by VAPE combines all possibilities in one solution.
It can be used statically，16 pre-programmed curves can be selected and it is also possible to change and program the 16 curves yourself.
Parts requiredThe freely programmable SIP Performance by VAPE Ignition differs from the Road or Sport version in three components.
Instead of the one-piece “Electronic Unit” (Ignition Coil with CDI)，a separate ignition coil (item no.
51008700) and an ignition or control unit (item no.
51008610) are used.
The Flywheel also differs from the Sport and Road Ignition.
The keyway is offset by 149° to allow the adjustment range.
For Vespa Largeframe or PK Engines with a 20mm Cone，the Flywheel item no.
51007160 can be fitted.
For Lambretta DL/GP Crankshafts the Flywheel item no.
51002916.
The Ignition can therefore be purchased ready assembled，but it is also possible to purchase the parts individually and retrofit an existing SIP Performance by VAPE.
How are the 16 curves selected.
The control unit has 4 dip switches on the top.
These can be used to select the individual curves.
An overview of the different curves can be found in the download area.
We have also included a guide to selecting the right curves in the download area.
How can the curves be freely programmed.
The Ignition control unit can be connected to a computer via a USB Wire.
The Wire is included with the control unit.
The program for programming is included with the control unit.
Detailed programming instructions can be found in the download area.
Connection of the IgnitionThe connection diagram shows how to connect the Ignition correctly.
Conclusion：A real high-end tuning gadget to elicit the Engine’s full potential in all situations.
However，handling it requires professional knowledge and a great deal of
Scope of delivery of the ignition SIP PERFORMANCE by VAPE AC
Flywheel
Ignition/lighting coils
Stator plate
Fanwheel
Voltage regulator
CDI Ignition Unit
Ignition coil
HT lead
Mounting material
Plug
Mounting instructions

ユーザのインプレッションを見る

適合車種： PX100E、P125X、PX125E、125GTR、125TS、P150S、200Rally ( 適合車種を見る )