Turn Signal Set， Front， Blue， RC30 Style

Following Items ：
Turn Signal， Front， Right， Blue， RC30 Style ( x 1 )
Turn Signal， Front， Left， Blue， RC30 Style ( x 1 )
Machine Screw， M4x35 ( x 2 )
Bush， Turn Signal， 22mm， RC36-2. RC30 Style ( x 2 )
Mount Body， Front， Turn Signal， RC36-2. RC30 Style ( x 2 )
バイク用配線パーツや工具をお探しなら【エーモン】のMOTOLECTIONシリーズはこちら

※画像はイメージです。
※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。
Turn Signal Set， Front， Blue， RC30 Style
This indicator set is suitable for an RC30 tribute and is plug and play when used with TYGA Performance body kits designed for the RC36-2. It consists of Honda and TYGA parts to provide a cost effective and convincing solution for people wanting to build an RC30 tribute with JDM style turn signals
The indicator body itself is OEM Honda which is of very similar shape to the JDM RC30 indicators which have long been discontinued. The bodies are marginally shorter but they use the exact same lens as the RC30. Note these indicators can also be installed on similar vintage models such as the MC18， MC19， NC23， NC30 etc. and even the RC30. As a bonus， they use high wattage 15W bulbs so make sure the turn signal relay that you intend to use is suitable for this type of bulb. If in doubt， order relay TELC-0002. We have changed the connectors on the turn signals from modern style rectangular type to bullet type and colour coded them correctly to enable them to be plug and play for the previously mentioned models.
The front rubber grommets supplied with this turn signal kit are designed specifically to fit our RC36 tribute fairing and are the same length as the RC30 ones. Note these grommets will also fit any similar vintage Hondas on the front and rear where applicable (substituting for part number 33611-KV3-700) such as the NC30， NC23， MC18 MC21， MC22， NC35 etc but note they are longer than 33611-KV3-700， meaning the turn signals are further out from the fairing by a few mm.
Note these grommets are wider at the base than the grommet used on the RC30 grommet 33615-MR7-000 so we don’t recommend this particular product for an actual RC30 fairing but we can provide upon request a similar one that does not have the wide base.
We supply all the necessary bushes and bolts to complete the kit.
For set with front and rear turn signals see BPLT-0036 and BPLT-0038
Note all the parts available in this kit are available as individual components and can be found in the stock list category.

ユーザのインプレッションを見る

適合車種： VFR750F ( 適合車種を見る )